When it comes to setting up a Good Police Scanner For Car use, one of the most crucial components you’ll need is a reliable antenna mount. Among the various options available, the NMO (New Motorola) mount stands out as a popular and effective choice. This type of mount has been around for decades and remains a favorite among professionals and enthusiasts alike due to its robust design and waterproof capabilities.
Why Choose an NMO Mount for Your Car Scanner Antenna?
NMO mounts offer several advantages that make them ideal for installing antennas for your good police scanner for car.
- Waterproof Reliability: When installed correctly, NMO mounts create a waterproof seal, even when the antenna is removed. This is a significant benefit compared to some other mount types that can leak, potentially damaging your vehicle’s interior or electrical systems. This feature is especially important for maintaining a good police scanner for car setup in all weather conditions.
- Durability and Commonality: The NMO mount is known for its durability and widespread use. Its robust design ensures a stable and secure connection for your antenna, which is essential for optimal scanner performance. The commonality of NMO mounts also means a wide availability of compatible antennas and accessories, making it easier to find the right equipment for your good police scanner for car.
Step-by-Step Guide to Installing an NMO Mount
Installing an NMO mount might seem daunting at first, but by following these steps, you can confidently set up your antenna for a good police scanner for car experience.
-
Drilling the Hole: You will need to drill a 3/4 inch hole in your vehicle’s desired location for the mount. Ensure you choose a location that is suitable for antenna placement and allows for cable routing.
-
Inserting the Mount: Feed the coaxial cable through the drilled hole from underneath the vehicle. Then, insert the NMO mount into the hole from the top down. It’s crucial to install it from the top; attempting to install from underneath will not work due to the mount’s design.
-
O-Ring Check: Locate the O-ring on the NMO mount and ensure it is properly seated in its groove on the mount’s “ring.” This O-ring is critical for creating the waterproof seal. Carefully position it to avoid pinching or cutting, as this is the most common cause of leaks.
-
Using the Tool (or Needle Nose Pliers): On the part of the mount where the coax cable attaches, you’ll notice two small holes. These are designed for a special tool to prevent the mount from spinning while tightening the retaining ring. If you don’t have this tool, needle-nose pliers fit perfectly into these holes and serve the same purpose.
-
Tightening the Ring: Thread the retaining ring onto the mount from underneath the vehicle. Tighten the ring to compress the O-ring and ensure the metal of the ring makes good contact with the vehicle’s metal. Avoid overtightening, as excessive force can damage the mount.
-
Wrench or Channel Locks: While the correct wrench size for the retaining ring is 15/16ths, channel-lock pliers can also be effectively used to tighten the ring.
By following these steps carefully, you can properly install an NMO mount and ensure a solid foundation for your good police scanner for car antenna. Remember to take your time and double-check each step to guarantee a waterproof and reliable installation. If you’re unsure at any point, seeking assistance from someone with prior experience in NMO mount installation is always a good idea. Enjoy enhanced reception with your properly mounted police scanner antenna!
